60M100-00 | Bently Nevada | Machinery Condition Monitor

Original price was: $4,680.00.Current price is: $2,889.00.

The Bently Nevada 60M100-00 is a machinery condition monitor, leveraging advanced signal processing and machine – learning algorithms to comprehensively monitor the condition of rotating machinery, enabling early detection of potential issues and optimization of performance.

Ayla082209@gmail.com

The price is for reference only. Please contact customer service for the actual price.

Category: Bently Nevada Tags: 3500 monitor module, BENTLY 3500 System Rack, power module, Redundant Power Supply Module, Standard Extension Cable

Description

Parameter	Details
Model	60M100-00
Manufacturer	Bently Nevada
Product Type	Machinery Condition Monitor
Input Power	Min: 18 Vdc, Max: 36 Vdc
Current Max	1.7 A
Inrush Current Max	2.7 A (less than 5 ms)
Module Inputs Max	12 dynamic signals and 2 keyphasor signals
Dynamic Range	110 dB @ fs = 102.4 ksps
Signal / Noise Ratio	110 dB @ fs = 102.4 ksps
A/D Conversion	Sigma – delta 24 bits nominal
Bandwidth	0 to 40 kHz
Outputs	– Two independent ethernet ports: Net A: 10/100 baset, network dhcp port Net B: 10/100 baset, local static ip port – Buffered signal outputs: two 15 – pin D sub connectors, 550 – ohm output impedance
LED Indicators	– Power LED: indicates proper power input – OK LED: indicates system is functioning properly – Danger LED: indicates a danger alarm condition – Alert LED: indicates an alert condition – Kph 1 OK LED: indicates keyphasor signal 1 is triggering – Kph 2 OK LED: indicates keyphasor signal 2 is triggering – Net A: indicates valid link on network A – Tx/Rx A: indicates network traffic on network A – Net B: indicates valid link on network B – Tx/Rx B: indicates network traffic on network B
Accuracy	– Direct pk or rms: within ± 0.5 % of full – scale typical, ± 1.1 % worst case – Bias: + 0.4 V/- 0.8 V typical, + 0.8 V/- 1.34 V worst case – Rotor, mesh, and fault frequencies: ± 6.7 % typical, ± 9.7 % worst case – Bearing frequencies: ± 6.7 % typical, ± 9.7 % worst case – Tower sway: ± 0.16 m/s² (0.016 g) typical, ± 0.23 m/s² (0.023 g) worst case – Kurtosis: ± 1 % (50 Hz to 10,000 Hz), ± 3 % (1 Hz to 49.9 Hz) – Generator electrical noise: ± 1 % (50 Hz to 10,000 Hz), ± 3 % (1 Hz to 49.9 Hz) – Crest factor: within ± 0.5 % of full – scale typical, ± 1.1 % worst case – Minimum amplitude for measurements: 0.6 m/s² (0.06 g)
Alarming Modes	– Modes: Mode 1: 25 % to 40 % power Mode 2: > 40 % to 55 % power Mode 3: > 55 % to 70 % power Mode 4: > 70 % to 85 % power Mode 5: > 85 % power – Setpoints: 2 levels: warning and alarm – Time delay: 300 seconds (fixed) for all measurements – Latching: all alarm statuses are latching
Weight	1.4 kg (3 lbs)
Mounting	DIN rail mounting
Dimensions	225 x 150 x 55 mm (8.88 x 5.89 x 2.17 inches)
Operating Temperature	– 40 °C to + 70 °C (- 40 °F to + 158 °F)
Storage Temperature	– 50 °C to + 85 °C (- 58 °F to + 185 °F)
Humidity	95% non – condensing

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “60M100-00 | Bently Nevada | Machinery Condition Monitor”

About brand

The BENTLY 3500 system is a professional machinery protection and condition monitoring solution widely used in industries like oil and gas, power generation, and petrochemicals. It adopts a modular design, allowing flexible configuration of monitoring modules (e.g., vibration, temperature, and speed modules) to track key operating parameters of rotating equipment such as turbines and compressors. By collecting and analyzing data in real time, it can promptly identify issues like equipment imbalance or bearing wear, trigger alarms or shutdowns when thresholds are exceeded, and effectively prevent unexpected equipment failures to ensure production continuity.