-33%
60M100-00 | Bently Nevada | Machinery Condition Monitor
Original price was: $4,680.00.$2,889.00Current price is: $2,889.00.
84152-01 | Bently Nevada | Seismic Accelerometer
Original price was: $2,640.00.$1,399.00Current price is: $1,399.00.
2300/25-00 | Bently Nevada | Dual – Channel Vibration Monitor
Original price was: $2,360.00.$1,580.00Current price is: $1,580.00.
The Bently Nevada 2300/25-00 is a dual – channel vibration monitor, offering cost – effective and continuous vibration monitoring along with protection for less critical and standby machinery in multiple industries by leveraging advanced signal processing and a variety of input/output interfaces.
-
-
Ayla082209@gmail.com
The price is for reference only. Please contact customer service for the actual price.
Description
| Parameter | Details |
|---|---|
| Model | 2300/25-00 |
| Manufacturer | Bently Nevada |
| Product Type | Dual – Channel Vibration Monitor |
| Inputs | – Two seismic or proximity measurement input channels from various accelerometers, velomitor and proximitor types
– One velocity input channel for time – synchronized measurements – Can support a range of sensors: – ICP accelerometers: 0.2 Hz high – pass, 20 kHz low – pass; sensitivity 5 – 575 mV/g; range 2 – 80 g peak; bias voltage – 12VDC; configurable OK voltage limits (-0.25 to – 22 V, upper and lower); constant – current source 3.3 mA ± 5%, open – circuit voltage – 21 to – 24 VDC, accuracy ± 1% of full – scale – Custom 2 – wire or 3 – wire accelerometers – For speed/keyphasor input: Eddy – current probes (supply voltage – 22.8 to – 25.2 VDC, max current 15 mA, short – circuit current 15.1 – 23.6 mA, accuracy ± 1% of range, input impedance 10 kΩ in 3 – wire voltage mode, speed range 1 – 120,000 RPM), proximity switches (supply voltage – 10 to – 24 VDC, non – Ok voltage – 2.75 ±0.05 V, speed range 1 – 120,000 RPM), magnetic – pickup sensors (input voltage up to ±125V (250Vp – p), speed range 200 – 120,000 RPM) |
| Outputs | – Relay contact outputs
– 4 – 20 mA outputs (configurable) – SPA outputs – Modbus TCP outputs – Two programmable relay outputs (single – pole double – throw, epoxy – sealed, contact life 100,000 cycles @ 5 A 250 VAC, 200,000 cycles @ 1 A 24 VDC; insulation impedance min 1000 MΩ @ 500 VDC; closed – contact resistance max 1 Ω; open – contact resistance min 1 MΩ; max switch voltage 250 VAC / 250 VDC; max break current 6 A @ 250 VAC / 6 A @ 24 VDC; max working capacity 1500 VA / 150 W) – Three buffered sensor outputs (including keyphasor signal) with short – circuit and EMI protection, output via BNC connectors |
| Power Supply | DC input: 18 – 36VDC, maximum 7.5W |
| Communication | – Ethernet 10/100 Base – T for configuration using Bently Nevada Monitor Configuration Software (includes RSA encryption)
– Modbus over Ethernet – Supports optional Modbus gateway for communication with DCSs, SCADA systems, PLCs or System 1 software; can also communicate via software – configurable RS232/485 serial port |
| Display | – LCD for displaying vibration amplitude, setpoints, speed, and configuration information
– LED indicators for monitor status (OK, protection fault, user inhibit, relay status, TX/RX for Ethernet status and communication, warning LED when any channel is in warning state) |
| Dimensions (W x D x H) | 127 mm x 127 mm x 76.2 mm |
| Weight | 1.03 kg |
| Operating Temperature Range | – 30 °C to + 65 °C |
| Storage Temperature Range | – 40 °C to + 85 °C |
| Humidity | Maximum 95% non – condensing |
| Applications | – Monitoring and protecting machinery in industries such as oil and gas, power generation, water treatment, pulp and paper, manufacturing, mining, cement
– Suitable for pumps, fans, generators, gearboxes, turbines, and other rotating equipment |
Reviews (0)
About brand
The BENTLY 3500 system is a professional machinery protection and condition monitoring solution widely used in industries like oil and gas, power generation, and petrochemicals. It adopts a modular design, allowing flexible configuration of monitoring modules (e.g., vibration, temperature, and speed modules) to track key operating parameters of rotating equipment such as turbines and compressors. By collecting and analyzing data in real time, it can promptly identify issues like equipment imbalance or bearing wear, trigger alarms or shutdowns when thresholds are exceeded, and effectively prevent unexpected equipment failures to ensure production continuity.
BENTLY NEVADA 3500/20 125744-02 Rack Interface Module
Original price was: $980.00.$669.00Current price is: $669.00.
BENTLY NEVADA | 149986-01E | 16 – channel relay control modul
Original price was: $3,690.00.$699.00Current price is: $699.00.
3500/94 145988-01 | Bently Nevada | VGA Display Module with Touch Screen
Original price was: $2,899.00.$1,366.00Current price is: $1,366.00.
BENTLY NEVADA 3500/44M 4- channel vibration monitor
Original price was: $3,450.00.$1,788.00Current price is: $1,788.00.
Bently Nevada | 3500/33 149986-01 | 16 – Channel Relay Module
Original price was: $1,590.00.$999.00Current price is: $999.00.
135489-02 | Bently Nevada | I/O Module
Original price was: $2,890.00.$2,188.00Current price is: $2,188.00.
BENTLY NEVADA 1900/65A 172323-01 General equipment monitor
Original price was: $3,980.00.$1,288.00Current price is: $1,288.00.
Bently Nevada 3500/05-01-03-00-00-00 System Rack
Original price was: $1,580.00.$1,099.00Current price is: $1,099.00.
3500/72M 176449-08 Bently Nevada 16-Channel Relay Output Module
Original price was: $4,980.00.$2,199.00Current price is: $2,199.00.
Shipping & Delivery
Reviews
There are no reviews yet.