-38%
1900/65A-00-01-01-01-01 | Bently Nevada | General - Purpose Equipment Monitor
Original price was: $5,980.00.$3,650.00Current price is: $3,650.00.
2300/25-00 | Bently Nevada | Dual - Channel Vibration Monitor
Original price was: $2,360.00.$1,580.00Current price is: $1,580.00.
60M100-00 | Bently Nevada | Machinery Condition Monitor
Original price was: $4,680.00.$2,889.00Current price is: $2,889.00.
The Bently Nevada 60M100-00 is a machinery condition monitor, leveraging advanced signal processing and machine – learning algorithms to comprehensively monitor the condition of rotating machinery, enabling early detection of potential issues and optimization of performance.
-
-
Ayla082209@gmail.com
The price is for reference only. Please contact customer service for the actual price.
Description
| Parameter | Details |
|---|---|
| Model | 60M100-00 |
| Manufacturer | Bently Nevada |
| Product Type | Machinery Condition Monitor |
| Input Power | Min: 18 Vdc, Max: 36 Vdc |
| Current Max | 1.7 A |
| Inrush Current Max | 2.7 A (less than 5 ms) |
| Module Inputs Max | 12 dynamic signals and 2 keyphasor signals |
| Dynamic Range | 110 dB @ fs = 102.4 ksps |
| Signal / Noise Ratio | 110 dB @ fs = 102.4 ksps |
| A/D Conversion | Sigma – delta 24 bits nominal |
| Bandwidth | 0 to 40 kHz |
| Outputs | – Two independent ethernet ports:
Net A: 10/100 baset, network dhcp port Net B: 10/100 baset, local static ip port – Buffered signal outputs: two 15 – pin D sub connectors, 550 – ohm output impedance |
| LED Indicators | – Power LED: indicates proper power input
– OK LED: indicates system is functioning properly – Danger LED: indicates a danger alarm condition – Alert LED: indicates an alert condition – Kph 1 OK LED: indicates keyphasor signal 1 is triggering – Kph 2 OK LED: indicates keyphasor signal 2 is triggering – Net A: indicates valid link on network A – Tx/Rx A: indicates network traffic on network A – Net B: indicates valid link on network B – Tx/Rx B: indicates network traffic on network B |
| Accuracy | – Direct pk or rms: within ± 0.5 % of full – scale typical, ± 1.1 % worst case
– Bias: + 0.4 V/- 0.8 V typical, + 0.8 V/- 1.34 V worst case – Rotor, mesh, and fault frequencies: ± 6.7 % typical, ± 9.7 % worst case – Bearing frequencies: ± 6.7 % typical, ± 9.7 % worst case – Tower sway: ± 0.16 m/s² (0.016 g) typical, ± 0.23 m/s² (0.023 g) worst case – Kurtosis: ± 1 % (50 Hz to 10,000 Hz), ± 3 % (1 Hz to 49.9 Hz) – Generator electrical noise: ± 1 % (50 Hz to 10,000 Hz), ± 3 % (1 Hz to 49.9 Hz) – Crest factor: within ± 0.5 % of full – scale typical, ± 1.1 % worst case – Minimum amplitude for measurements: 0.6 m/s² (0.06 g) |
| Alarming Modes | – Modes:
Mode 1: 25 % to 40 % power Mode 2: > 40 % to 55 % power Mode 3: > 55 % to 70 % power Mode 4: > 70 % to 85 % power Mode 5: > 85 % power – Setpoints: 2 levels: warning and alarm – Time delay: 300 seconds (fixed) for all measurements – Latching: all alarm statuses are latching |
| Weight | 1.4 kg (3 lbs) |
| Mounting | DIN rail mounting |
| Dimensions | 225 x 150 x 55 mm (8.88 x 5.89 x 2.17 inches) |
| Operating Temperature | – 40 °C to + 70 °C (- 40 °F to + 158 °F) |
| Storage Temperature | – 50 °C to + 85 °C (- 58 °F to + 185 °F) |
| Humidity | 95% non – condensing |
Reviews (0)
About brand
The BENTLY 3500 system is a professional machinery protection and condition monitoring solution widely used in industries like oil and gas, power generation, and petrochemicals. It adopts a modular design, allowing flexible configuration of monitoring modules (e.g., vibration, temperature, and speed modules) to track key operating parameters of rotating equipment such as turbines and compressors. By collecting and analyzing data in real time, it can promptly identify issues like equipment imbalance or bearing wear, trigger alarms or shutdowns when thresholds are exceeded, and effectively prevent unexpected equipment failures to ensure production continuity.
Bently Nevada | 3500/22M 288055-01 | Transient Data Interface Module
Original price was: $6,980.00.$4,999.00Current price is: $4,999.00.
330130-040-00-05 | Bently Nevada | Standard Extension Cable
Original price was: $570.00.$499.00Current price is: $499.00.
3701/55 323174-01 | Bently Nevada | Emergency Shutdown Device (ESD) CPU Module
Original price was: $2,288.00.$1,520.00Current price is: $1,520.00.
330130-085-00-05 | Bently Nevada | Standard Extension Cable
Original price was: $400.00.$199.00Current price is: $199.00.
330103-00-06-10-02-00 | Bently Nevada | Proximity Probe
Original price was: $390.00.$268.00Current price is: $268.00.
330106-05-30-05-02-05 | Bently Nevada | Reverse – Mount Proximity Probe
Original price was: $400.00.$188.00Current price is: $188.00.
BENTLY NEVADA 1900/65A 172323-01 General equipment monitor
Original price was: $3,980.00.$1,288.00Current price is: $1,288.00.
330101-00-40-10-02-05 | Bently Nevada | Proximity Probe
Original price was: $590.00.$366.00Current price is: $366.00.
84152-01 | Bently Nevada | Seismic Accelerometer
Original price was: $2,640.00.$1,399.00Current price is: $1,399.00.
Shipping & Delivery
Related products
Proximitor/Seismic Monitor | 3500/42M 176449-02 | Bently Nevada
The Bently Nevada 3500/42M 176449-02 is a 4 - channel proximitor/seismic monitor that accepts input from proximity and seismic transducers, processes signals to provide vibration and position measurements, and compares these with user - programmable alarms for machinery protection and condition monitoring.
Bently Nevada 3500/15 127610-01 Redundant Power Supply Module
The Bently Nevada 3500/15 127610-01 is a redundant power supply module for the 3500 machinery protection system, designed to deliver reliable, fault-tolerant power to all installed monitor modules in the system rack, ensuring uninterrupted machinery monitoring.
Data sheet:：3500/15 PDF
BENTLY NEVADA 3500/22M 288055-01 data interface module
BENTLY NEVADA 3500/22M 288055-01 is a high-performance transient data interface module, specifically designed for the 3500 machinery protection and condition monitoring system to collect, store, and transmit transient dynamic data (e.g., vibration waveforms) to host software, enabling real-time equipment fault analysis.
Reviews
There are no reviews yet.